Finden Sie schnell eiche massivplatte für Ihr Unternehmen: 21 Ergebnisse

Lackierwalzen auf Basis Polyurethanelastomerbeschichtung (Asmaprene FP, easypren) bringen in der Anwendung eine Reihe von Vorteilen gegenüber bisherigen Lösungen. Hohe Schnittfestigkeit Verschleißfest Beständig gegen Öl UND Lösungsmittel
 Hohe Linienlasten

Unsere Arbeit basiert auf Vertrauen – damit auch ihr in unsere Produkte vertraut, liefern wir gern das Messprotokoll mit. Bauteilvermessung oder Bauteilscan mittels Romer Absolute 7525 Si Messarm

Entwicklung von individuellen Bauteilen gemäß Kundenanforderungen auf Basis innovativster Materialien und den effizientesten Fertigungsverfahren im Bereich Kunststoff- und Faserverbundtechnik.

Neues Aufvulkanisieren und Runderneuern von beigestellten Kernen (Felgen) von Vorschubrädern mit hellem Gummi, Härte: 60, 75 oder 90 Shore A Durchgeführte Arbeitsschritte: Entfernen des Altbelages Belegen mit neuem Gummi Vulkanisieren in Presse oder Autoklav Zylindrisch auf Maß überdrehen oder überschleifen Oberflächen-Profil laut Kundenwunsch drag and drop! edit snipplet delete snipplet Vorschubräder - aufvulkanisieren und runderneuern Preise für das Runderneuern von Vorschubrädern Neues Aufvulkanisieren und Runderneuern von beigestellten Kernen (Felgen) von Vorschubrädern mit hellem Gummi, Härte: 60, 75 oder 90 Shore A (nach Angaben des Kunden) Preise für Standardgrößen hervorgehoben. Räder dieser Größe, welche keine Standardräder sind, müssen zum (Preis für Einzelfertigung) verrechnet werden.

TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal and electrical conductivity. These are accompanied by high purity and low outgassing in accordance with ESA regulation ECSS-Q-70-20. Its previous name was SINTIMID Pur HT.

Lamellenhalter mit 80° Grad Lamellenwinkel, für starren Sonnenschutz

Trinkflasche, edel gearbeitet, bestehend auf Biokunststoff (Polymilchsäure).

Starting with the base polymer TECASINT 2011, TECASINT 2031 with 40 % graphite has been developed. The plastic has high resistance to thermal ageing and improved self lubrication. This is accompanied POLYIMIDE WITH 40 % GRAPHITE Starting with the base polymer TECASINT 2011, TECASINT 2031 with 40 % graphite has been developed. The plastic has high resistance to thermal ageing and improved self lubrication. This is accompanied by minimised thermal elongation for dimensionally stable components and increased creep strength.

TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear POLYIMIDE WITH 15% GRAPHITE TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear behaviour. Thanks to its self lubricating property, TECASINT 2021 is well suited to lubricated and dry applications.

Starting with the base polymer TECASINT 1011, TECASINT 1031 has been developed. This material contains 40% graphite, unlike the starting material. TECASINT 1031 has a very high resistance to thermal a

Starting with the base polymer TECASINT 4011, TECASINT 4021 with 15% graphite has been developed. Thanks to the improved friction and wear properties, TECASINT 4011 is particularly suitable for tribol POLYIMIDE WITH 15 % GRAPHITE Starting with the base polymer TECASINT 4011, TECASINT 4021 with 15% graphite has been developed. Thanks to the improved friction and wear properties, TECASINT 4011 is particularly suitable for tribological applications. It is also suitable for dry applications since the material is self lubricating.

TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, i POLYIMIDE WITH 15 % MOS2 TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, in a vacuum or in inert gases (techn. dry). The plastic displays low outgassing in accordance with ESA regulation ECSS-Q-70-20. Alternative to Vespel SP3.

TECASINT 1021 black has been developed from the base polymer TECASINT 1011 natural. Unlike TECASINT 1011, however, it contains 15% graphite. The material has improved friction and wear properties for tribological applications. TECASINT 1021 is suitable for both lubricated and dry applications since it is self lubricating.

TECASINT 4121 is based on the base polymer TECASINT 4111, plus 15% graphite. The material is particularly suitable for tribological applications thanks to its improved friction and wear behaviour. Thanks to its self lubricating property, TECASINT 4121 is well suited to dry applications.

Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability (HDT/A=470°C), extremely low moisture absorption and high mechanical rigidity. UNFILLED POLYIMIDE Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis-a-vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS-Q-70-20.

Lamellenhalter mit 30° Grad Lamellenwinkel, für starren Sonnenschutz

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, UNFILLED POLYIMIDE TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has the maximum strength and elongation, together with a high modulus of elasticity and minimal thermal and electrical conductivity. TECASINT 2011 is highly pure with low outgassing in accordance with ESA regulation ECSS-Q-70-20.

Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strengt UNFILLED POLYIMIDE Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strength, TECASINT 4011 has high elongation at break and toughness. Rigidity and modulus are significantly increased vis-a-vis conventional polyimides in a temperature range up to 260°C. It also has minimal thermal and electrical conductivity. The plastic is highly pure and displays low outgassing in accordance with ESA regulation ECSS-Q-70-20.

Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The ma POLYIMIDE WITH 15 % GRAPHITE AND 10 % PTFE Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The material is self lubricating, which means it also has good properties in dry running conditions. TECASINT 1061 is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. UNFILLED POLYIMIDE The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation. TECASINT 5111 natural is produced as polyimide sheet, polyimide rod and tube.

Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low POLYIMIDE WITH 15 % GRAPHITE AND 10 % PTFE Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low coefficient of friction. Owing to its self lubricating property, TECASINT 2061 is very good for dry application. The material is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.